$990.67
Accufab offers a high performance 105mm throttle body for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with our top of the line unit and get your 5.0L the air it's lacking.
Available Versions: Accufab's 105mm throttle body is available as a Race, MAX or V-Band version.
Features: Full body stainless steel shaft, 3 position linkage arm with threaded ball stud, linkage arm is hard anodized black, with Idle Air Control provision, O-ring Groove seal on the back, and Sealed and Air Leak resistant up to 100 psi.
All 105mm throttle body versions measure 105mm at the blade and each has a 4.5" inlet. There is no vacuum elbow and 4.5" tubing/hose is required.
Better Air Flow for More Power: This 105mm upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications.
Exceptional Quality. This throttle body is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Furthermore, the 105mm throttle body features a split shaft design which helps prevent the shaft from breaking under intense pressure. Manufactured in the USA.
Application: This Accufab 105mm single blade throttle body is specifically designed for use on the 1986 - 1993 Ford Mustang 5.0L.
Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.
Accessories Included: The throttle body O-RING and ball stud, plus an IAC gasket are included. No mounting hardware available.
Accufab has several optional accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS (Throttle Position Sensor) or an IAC (Idle Air Control) adapter to use your GM IAC. If you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals.
Available Versions: Accufab's 105mm throttle body is available as a Race, MAX or V-Band version.
Features: Full body stainless steel shaft, 3 position linkage arm with threaded ball stud, linkage arm is hard anodized black, with Idle Air Control provision, O-ring Groove seal on the back, and Sealed and Air Leak resistant up to 100 psi.
All 105mm throttle body versions measure 105mm at the blade and each has a 4.5" inlet. There is no vacuum elbow and 4.5" tubing/hose is required.
Better Air Flow for More Power: This 105mm upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications.
Exceptional Quality. This throttle body is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Furthermore, the 105mm throttle body features a split shaft design which helps prevent the shaft from breaking under intense pressure. Manufactured in the USA.
Application: This Accufab 105mm single blade throttle body is specifically designed for use on the 1986 - 1993 Ford Mustang 5.0L.
Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.
Accessories Included: The throttle body O-RING and ball stud, plus an IAC gasket are included. No mounting hardware available.
Accufab has several optional accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS (Throttle Position Sensor) or an IAC (Idle Air Control) adapter to use your GM IAC. If you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals.
Product Specification
- TitleACCUFAB RACE 105MM T,BODY W/4.5" V-BAND
- SKUACCF105VK
- BrandAccufab
- HSNACCF105VK
- Weigh5.000 kg
Accufab offers a high performance 105mm throttle body for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with our top of the line unit and get your 5.0L the air it's lacking.
Available Versions: Accufab's 105mm throttle body is available as a Race, MAX or V-Band version.
Features: Full body stainless steel shaft, 3 position linkage arm with threaded ball stud, linkage arm is hard anodized black, with Idle Air Control provision, O-ring Groove seal on the back, and Sealed and Air Leak resistant up to 100 psi.
All 105mm throttle body versions measure 105mm at the blade and each has a 4.5" inlet. There is no vacuum elbow and 4.5" tubing/hose is required.
Better Air Flow for More Power: This 105mm upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications.
Exceptional Quality. This throttle body is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Furthermore, the 105mm throttle body features a split shaft design which helps prevent the shaft from breaking under intense pressure. Manufactured in the USA.
Application: This Accufab 105mm single blade throttle body is specifically designed for use on the 1986 - 1993 Ford Mustang 5.0L.
Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.
Accessories Included: The throttle body O-RING and ball stud, plus an IAC gasket are included. No mounting hardware available.
Accufab has several optional accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS (Throttle Position Sensor) or an IAC (Idle Air Control) adapter to use your GM IAC. If you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals.
Available Versions: Accufab's 105mm throttle body is available as a Race, MAX or V-Band version.
Features: Full body stainless steel shaft, 3 position linkage arm with threaded ball stud, linkage arm is hard anodized black, with Idle Air Control provision, O-ring Groove seal on the back, and Sealed and Air Leak resistant up to 100 psi.
All 105mm throttle body versions measure 105mm at the blade and each has a 4.5" inlet. There is no vacuum elbow and 4.5" tubing/hose is required.
Better Air Flow for More Power: This 105mm upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications.
Exceptional Quality. This throttle body is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Furthermore, the 105mm throttle body features a split shaft design which helps prevent the shaft from breaking under intense pressure. Manufactured in the USA.
Application: This Accufab 105mm single blade throttle body is specifically designed for use on the 1986 - 1993 Ford Mustang 5.0L.
Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.
Accessories Included: The throttle body O-RING and ball stud, plus an IAC gasket are included. No mounting hardware available.
Accufab has several optional accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS (Throttle Position Sensor) or an IAC (Idle Air Control) adapter to use your GM IAC. If you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals.