Heat Insulator Gasket - 0.320" thick
Square-Bore

Head Bolt Bushings with Integral Washers
Ford 289-302W-5.0L, 20 per package
Complete set of head bolt bushings allow the use of stock 7/16" head bolts with Edelbrock heads.

Performer RPM heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. These heads give great torque and horsepower up to 6500 rpm.

• Direct bolt-on heads for 1961-76 390-427-428 Fords.
• 428 Cobra Jet-sized valves promote excellent flow for streetable power.

Combustion chamber volume: 72cc
Intake runner volume: 170cc
Exhaust runner volume: 125cc
Intake valve diameter: 2.09"
Exhaust valve diameter: 1.66"
Valve stem diameter: 3/8"
Valve guides: Manganese bronze
Deck thickness: 5/8"
Valve spring diameter: 1.55"
Valve spring maximum lift:.600"
ng>Rocker stud: N/A
Guide plate: N/A
Pushrod diameter: 3/8"
Valve Angle: 13°
Exhaust port location: Stock
Spark plug fitment: 14mm x 3/4" reach, gasket seat
Made In: USA

• Designed for 1955-86 262-400 Small Block Chevrolet
• The award-winning RPM Air-Gap incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.
• NASCAR Edition RPM Air-Gap manifolds will set you apart from the crowd with their durable and distinctive black powder coated finish and attractive full colour emblem.
• Includes rear water outlets, two distributor clamp locations and nitrous bosses.
• Accepts all 1976 and later alternator and A/C brackets for the street.
• Heater outlet boss is angled for proper fit over the valve cover.
• Temp sensor boss clears all waternecks.
• No provision for exhaust-heated chokes and no exhaust crossover.
• Will not fit under stock Corvette hood.
• Made in USA

These new intake manifolds are designed for street and high performance 308-383 c.i.d. Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads. These RPM Air-Gap manifolds are a dual-plane design that are tuned for excellent throttle response from 1500 to 6500 rpm. R&D testing with a 355 cid Holden engine produced 405 flywheel horsepower and 427 ft-lbs. of torque with #7594 RPM intake and stock cast iron cylinder heads. Matching Performer RPM aluminium cylinder heads coming soon.

PLEASE NOTE: This manifold does not suit engines with roller cam and lifters!!!

Performer RPM are dual-plane, high-rise intakes with 180° firing order to produce incredible top-end horsepower while retaining good throttle response. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not for emissions equipped engines. Edelbrock's Performer RPM gives you the ultimate in street high-performance.

• Designed for Small Block Chevy V8s for maximum power and a broad torque curve for high-performance street/marine.
• Provides power like a single-plane and throttle response like a dual-plane.
• Has provisions to add oil fill tube.
• No provisions for exhaust heated or stock-style choke.
• Accepts late-model waterneck, air-conditioning, alternator and H.E.I. Will fit castiron Chevrolet Bowtie heads, but will not fit 1987 and later cast iron heads.
• Will not fit under stock Corvette hood.
• Made in USA

Designed for Gen IV engines with LS3, L92 and L76 rectangular port cylinder heads. The Performer RPM LS3 manifoldis ideal for anybody looking to build a carbureted LS3 or LS2 engine with an operating range between 1,500 - 6,500 rpm. It allows the use of a carburetor on these originally computer-controlled engines, offering maximum power and a broad torque curve. It features a high-rise dual-plane design combined with a plenum that has been optimized for square-bore carburetors. Our advanced casting techniques allowed us to create a lightweight casting that weighs in at 14 lbs.

Performer RPM LS3 includes a provision for mounting an MSD Ignition Timing Control Module #6012, including passages for routing the coil wire harness, for a clean look. A special throttle and trans bracket that works with 700R-4, 200-4R and Turbo 350 transmissions is also included, making this an easy retro-fit into any muscle car, street rod or marine application.

RPM Air-Gap 351W Intake Manifold
Ford 351W, 1500-6500 rpm
Designed for street and high performance 351-400+ cid 351-W Ford, the RPM Air-Gap incorporates the same race-winning design that's been used on our Victor Series competition intakes for years. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than # ED7181 for compatibility with large displacement, stroker 351-W based engines.
 
Includes nitrous bosses.
No provision for exhaust heated chokes and no exhaust crossover.
Made in USA

HOLDEN 355+ V8 VICTOR JR. HOLDEN (3500-7500 RPM) The Edelbrock Victor Jr. Holden is for use with competition 355+ c.i.d. Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads. The Victor Jr. Holden is a single-plane design that is tuned for maximum air flow from 3500 to 7500 rpm. It features a taller design with long tapered runners for a broad operating rpm range. Will fit both stock 1988-1998 EFI style cylinder heads and the Edelbrock Holden VN RPM cylinder heads. It also features a 4150 flange for use with square-bore carburetors and throttle bodies. Includes extra material for porters to modify for use with 4500 series applications. The water outlet is machined for use with a small-block Chevy waterneck.

Designed for 340-360 Chrysler and 318 engines with 340-360 cylinder heads, the RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

• Accepts early-style waterneck only.
• Will not accept stock Thermo-Quad carburettor
• Will not fit 1992 and later Magnum engines.
• Includes nitrous bosses.
• No provision for exhaust heated chokes and no exhaust crossover.
• Made in USA

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other brands. This patented design greatly improves torque over a wide rpm range for excellent throttle response, especially off-idle through the mid-range. Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. There are EGR and non-EGR versions available for most V8 and some V6 engines.

• Designed for street 413-426-440 cid Chrysler V8s that measure 8.75" across block.
• Will not fit 1962-64 Max Wedge heads.
• Made in USA

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other brands.
This patented design greatly improves torque over a wide rpm range for excellent throttle response, especially off-idle through the mid-range.
Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
There are EGR and non-EGR versions available for most V8 and some V6 engines.
 
Performers accept late-model choke, water-neck, air-conditioning, alternator and H.E.I.
Has provisions to add oil fill tube.
Not for 1987 and later cast iron or Chevy Bowtie heads.
Will fit 1987 and later stock aluminium heads.
Made in USA

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other brands. This patented design greatly improves torque over a wide rpm range for excellent throttle response, especially off-idle through the mid-range. Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. There are EGR and non-EGR versions available for most V8 and some V6 engines.
 
Designed for street 260-289-302 cid Ford V8s without EGR
Will not fit Boss 302
Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket LK-SRK-4000.
Made in USA

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other brands.
This patented design greatly improves torque over a wide rpm range for excellent throttle response, especially off-idle through the mid-range.
Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
There are EGR and non-EGR versions available for most V8 and some V6 engines.
 
Designed for street 253-304-308 cid Holden V8.
Fits Red/Blue/Black Motors.
May have to drill out centre bolt holes depending on application.
Will not fit EFI Heads.
Made in USA

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimised to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburettors.
This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm.
Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy.
From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.
 
Made in USA

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other brands.
This patented design greatly improves torque over a wide rpm range for excellent throttle response, especially off-idle through the mid-range.
Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
There are EGR and non-EGR versions available for most V8 and some V6 engines.
 
Performer 351-2V is designed for street 302-351C and accepts 4V carb, however it's designed to improve the performance of engines that came stock with 2V carb and heads.
Will not fit Boss 302 or accept stock Motorcraft spread-bore carb.
No provision for exhaust heated chokes or exhaust crossover.
Made in USA

These versatile manifolds are excellent for many applications from high-performance street to drag/circle track racing.
They provide maximum performance for engines with standard port location, iron and aluminium cylinder heads.
The low-profile of the # ED2975 works well in applications with minimal hood clearance and where 1" or 2" spacers can be used for performance tuning.
When carb spacers are not allowed, the # ED2999 should be used.
Made in USA

Designed for 1955-86 262-400 Small Block Chevrolet
The award-winning RPM Air-Gap incorporates the same race-winning technology that's used on our Victor Series competition intakes.
The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.
Includes rear water outlets, two distributor clamp locations and nitrous bosses.
Accepts all 1976 and later alternator and A/C brackets for the street.
Heater outlet boss is angled for proper fit over the valve cover.
Temp sensor boss clears all waternecks.
No provision for exhaust-heated chokes and no exhaust crossover.
Will not fit under stock Corvette hood.
Made in USA

Designed for street 289-302W Ford, the RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.
Includes nitrous bosses.
No provision for exhaust heated chokes and no exhaust crossover.
Made in USA

Designed to improve performance on the street or racetrack, the RPM Air-Gap 351 Cleveland manifold features an open space that separates the runners from the hot engine oil resulting in a cooler, denser charge. The Edelbrock air-gap design utilises the same race-winning technology that's been used on Edelbrock's Victor Series competition intakes for many years. The RPM Air-Gap manifold for 351 Cleveland engines is designed to complement Edelbrock's new 351-C Performer RPM cylinder heads # ED61609, # ED61629 and also works well with 4V and 2V cast iron Cleveland heads. Made in USA

Victor Series Aluminium Water Pump
For Small Block Chevy, Short Style, 5/8" pilot shaft
 
Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track.
They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motor homes.
Using state-of-the art racing technology, Edelbrock has designed these "super cooling" water pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the engine block within 1%.
Available for most popular applications, these high-performance pumps flow in only one direction for optimum efficiency.
The casting's computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.
Standard and reverse rotation pumps are available for most Chevrolets, Fords, and Chryslers.
 
Has 3/4" ball bearing. Dimension from block surface to hub: 5-5/8". Inlet diameter: 1.80".

Victor Series Aluminium Water Pump
For Small Block Chevy, Long Style, 5/8" pilot shaft
 
Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track.
They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motor homes.
Using state-of-the art racing technology, Edelbrock has designed these "super cooling" water pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the engine block within 1%.
Available for most popular applications, these high-performance pumps flow in only one direction for optimum efficiency.
The casting's computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.
Standard and reverse rotation pumps are available for most Chevrolets, Fords, and Chryslers.
 
Has heavy-duty 3/4" ball/roller
bearing. Dimension from block surface to hub: 6-15/16". Inlet diameter: 1.80".

Victor Series Aluminium Water Pump
Ford 289-302-351W, Right Hand Inlet with back plate, 5/8" pilot shaft
Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track.
They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motor homes.
Using state-of-the art racing technology, Edelbrock has designed these "super cooling" water pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the engine block within 1%. Available for most popular applications, these high-performance pumps flow in only one direction for optimum efficiency.
The casting's computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.
Standard and reverse rotation pumps are available for most Chevrolets, Fords, and Chryslers.
 
Right-hand inlet with back plate. Dimension from casting to hub: 5.42". Inlet diameter: 1.78".

Victor Series Aluminium Water Pump
Ford 302-351W, Left Hand Inlet with back plate, 5/8" pilot shaft
Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track.
They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motor homes.
Using state-of-the art racing technology, Edelbrock has designed these "super cooling" water pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the engine block within 1%. Available for most popular applications, these high-performance pumps flow in only one direction for optimum efficiency.
The casting's computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.
Standard and reverse rotation pumps are available for most Chevrolets, Fords, and Chryslers.
 
Left-hand inlet with back plate. Dimension from casting to hub: 5.70". Inlet diameter: 1.78".

Victor Series Aluminium Water Pump
Ford 302-351C, Left Hand Inlet with no back plate, 5/8" pilot shaft
Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track.
They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motor homes.
Using state-of-the art racing technology, Edelbrock has designed these "super cooling" water pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the engine block within 1%.
Available for most popular applications, these high-performance pumps flow in only one direction for optimum efficiency.
The casting's computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.
Standard and reverse rotation pumps are available for most Chevrolets, Fords, and Chryslers.
 
Left-hand inlet with no back plate. Dimension from casting to hub: 5.71". Inlet diameter: 1.78".

Victor Series Aluminium Water Pump
Small Block Chrysler 318-360, 5/8" pilot shaft
Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track.
They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motor homes.
Using state-of-the art racing technology, Edelbrock has designed these "super cooling" water pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the engine block within 1%.
Available for most popular applications, these high-performance pumps flow in only one direction for optimum efficiency.
The casting's computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.
Standard and reverse rotation pumps are available for most Chevrolets, Fords, and Chryslers.
 
Direct replacement for stock water pump, will accept all factory pulleys and accessories.
Special cast-iron impeller and tightclearances provide increased coolant flow, block pressure, and balanced delivery.
Has heavy-duty to hub: 5.55".
Inlet ball/ball bearing and seal
Dimension from block surface diameter: 1.75".

Victor Series Aluminium Water Pump
Big Block Chevy, Short Style, 5/8" pilot shaft
Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track. They're ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motor homes. Using state-of-the art racing technology, Edelbrock has designed these "super cooling" water pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the engine block within 1%. Available for most popular applications, these high-performance pumps flow in only one direction for optimum efficiency. The casting's computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible. Standard and reverse rotation pumps are available for most Chevrolets, Fords, and Chryslers.
Fits all 1965-68 B/B Chevy passenger cars, 1966-72 trucks and 1969-70 B/B Corvettes. Has 3/4" ball/ball bearing. Dimension from block surface to hub:5-3/4". Inlet diameter: 1.95".

Performer and Thunder Carburettor Series Rebuild Kit
includes parts & gaskets to rebuild all Edelbrock square-bore carbs